SciAps X-50 Handheld XRF Analyzer for Alloy, Mining & Soil Analysis | Parts & Accessories
28 products
Showing 25 - 28 of 28 products
SciAps X-50 Handheld XRF Analyzer for Alloy, Mining & Soil Analysis
The SciAps X-50 handheld XRF analyzer is a cost-effective, high-performance solution for real-time elemental analysis across alloy identification, mining exploration, soil testing, and precious metals verification. This collection brings together the X-50 analyzer, essential accessories, and consumables required to support these applications in the field and on the shop floor.
Built with a cost-effective 7 mm² detector platform and optimized X-ray tube configurations (40 kV and 50 kV), the X-50 delivers fast, precise results for transition and heavy metals, operating at speeds up to 2X higher than comparable systems. It is specifically designed for users who do not require light element detection (Mg, Al, Si, S, P), making it a strong value choice for many industrial and field applications.
Whether you're sorting scrap metal, analyzing ore samples, screening soil contamination, or verifying precious metals, the X-50 provides dependable performance with a streamlined feature set.
Applications of the SciAps X-50 Handheld XRF
Alloy Identification (PMI & Scrap Sorting)
The X-50 is widely used for positive material identification (PMI) and scrap sorting of transition and heavy metals. It delivers fast, reliable results for:
- Stainless steels
- High-temperature alloys
- Copper and red metal alloys
- Basic aluminum sorting is supported for:
- MLC classifications
- 2000 and 7000 series Aluminum Alloys
Elemental range for Alloy mode: Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Y, Zr, Nb, Mo, W, Ta, Hf, Re, Au, Pb, Bi, Ru, Pd, Ag, Cd, Sn, Sb
This makes the X-50 a strong fit for scrap yards, recyclers, and fabrication environments that need fast, repeatable alloy ID without light element requirements.
Mining & Exploration (Geochemical Analysis)
For mining and exploration workflows, the X-50 provides rapid geochemical analysis to support:
- Mineral exploration
- Pathfinder element detection
- On-site decision making
Elemental Range (Mining Mode): K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Zr, Nb, Mo, Ag, Sn, Sb, S, Ta, W, Au, Hg, Pb, Bi, U
This enables field teams to quickly assess elemental composition without lab delays.
Soil & Environmental Testing
The X-50 is configured for soil and environmental screening, allowing users to detect heavy metals and contaminants directly in the field.
Common use cases include:
- Site assessments
- Environmental compliance testing
- Contamination screening
Elemental Range (Soil Mode): Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Rb, Zr, Mo, W, Tl, Hg, Pb, Bi, Ag, Cd, Sn, Sb
This makes it a practical tool for environmental consultants and remediation professionals.
Precious Metals Analysis
The X-50 can be configured for precious metals analysis, supporting:
- Jewelers
- Gold and precious metals buyers
- Precious Metals Refiners
- Pawn Shops
Elemental range for Precious Metals mode: Au, Ag, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, W, Ge, Ir, Pt, Pb, Bi, Zr, Mo, Ru, Rh, Pd, Cd, In, Sn, Sb
This mode is ideal for gold purity testing (karat verification), silver and bullion analysis, and identifying plated or counterfeit materials. Results are delivered in seconds, enabling fast, confident buy/sell decisions and efficient front-counter testing.
Analyzer Configurations
The SciAps X-50 is available in multiple application-specific configurations:
- Alloy Sorting Analyzer
- Precious Metals Analyzer
- Mining & Exploration Configuration
- Soil Contamination Configuration
| Specification | Details |
|---|---|
| X-Ray Tube | 40 kV Rh anode (alloy) or 50 kV tube (mining, soil, other applications) |
| Detector | 7 mm² Silicon Drift Detector (SDD), 170 eV resolution at Mn K-alpha |
| Weight | 3.1 lbs with battery |
| Dimensions | 9.38 in x 11.15 in x 3.34 in (238 x 283 x 84 mm) |
| Calibration | Fundamental parameters with external 316 SS check standard |
| Power | Rechargeable Li-ion battery, AC power, hot-swap capability (60 sec max) |
| Display | 3.5-inch color capacitive touchscreen |
| Processor | 1.2 GHz quad-core ARM Cortex A53 |
| Memory & Storage | 2 GB RAM, 16 GB storage |
| Connectivity | WiFi, Bluetooth, USB |
| Pulse Processor | 12-bit, 80 MSPS, 8K channel MCA |
| Operating Temp | 10°F to 130°F (25% duty cycle) |
| X-Ray Filtering | Single filter (alloy/mining/PM), multiple filters (soil/RoHS) |
| Security | User-level password and admin controls |
| Regulatory | CE, RoHS, USFDA registered, Canada RED Act |
Request a Quote for a customized configuration including more than one of these modes!
Accessories & Replacement Parts
- Measurement Windows
- Batteries (Li-ion, hot-swappable)
- Battery Charger Kits
- AC Power Adapters
- USB Data Cables
- Calibration & Verification
- 316 Stainless Steel Calibration Check Clips
- Testing Hardware
- Portable Test Stands
- Desktop / Benchtop Test Stands
- Consumables
- XRF Sample Cups (32mm)
- 4 Micron Prolene Film
The SciAps X-50 is ideal for
- Scrap yards and metal recyclers
- Manufacturing QA/QC teams
- Mining and exploration professionals
- Environmental consultants
- Precious metals buyers and refiners
It is best suited for users who:
- Need fast, reliable heavy metal analysis
- Want a cost-effective XRF solution
- Do not require light element detection
X-50 vs Other SciAps Models
| Model | Detector Type | Best For | Light Elements (Mg, Al, Si) | Tube / kV | Tube Power | Precision / Performance |
|---|---|---|---|---|---|---|
| X-5 | 7 mm2 SDD | Basic alloy sorting, scrap, entry-level PMI | ❌ No | 40–50 kV | 4W | Good |
| X-50 | 7 mm2 SDD | Cost-effective heavy metal analysis for alloy ID, scrap sorting, and precious metals | ❌ No | 40–50 kV | 4W | Good+ |
| X-200 | 20 mm2 SDD | Light elements + general alloy + manufacturing QA | ✅ Yes | 40–50 kV | 5W | Better |
| X-505 | 20 mm2 SDD | High-speed sorting, improved alloy sensitivity, soil, mining, & environmental testing | ✅ Yes | 40–50 kV | 5W | Better+ |
| X-550 | 20 mm2 SDD | Fast/advanced alloy, mining, soils, precious metals, Pb Paint, Environmental | ✅ Yes | 50 kV | 5W | Best |
| X-550 Geo | 20 mm2 SDD | Mining, geochem, low-level detection, soils | ✅ Yes | 50 kV | 5W | Best+ |
| X-555 | 50 mm2 SDD | Maximum speed, trace elements, highest performance | ✅ Yes | 55 kV | 5W | Excellent |
The X-50 is the best value platform for users focused on core metal analysis without needing advanced light element capability.
Frequently Asked Questions (FAQ)
What applications is the SciAps X-50 handheld XRF best suited for?
The SciAps X-50 is designed for alloy identification (PMI), scrap sorting, mining and exploration, soil testing, and precious metals analysis. It performs best in applications focused on transition and heavy metals, making it a strong choice for recyclers, field geologists, and environmental professionals.
Can the SciAps X-50 measure aluminum or other light elements?
No, the X-50 is not designed to measure light elements such as Mg, Al, Si, S, or P. It can perform limited aluminum alloy sorting (MLC’s, 2000 and 7000 series), but it is not suitable for full light element analysis.
If your application requires light element capability, consider upgrading to:
- SciAps X-200 → a more budget-friendly option for light element alloy analysis
- SciAps X-550 → a top-performance model with significantly improved light element sensitivity and speed
How fast is the SciAps X-50 compared to other handheld XRF analyzers?
The X-50 operates at speeds up to 2X faster than comparable analyzers using similar detector technology. Its reengineered internal geometry and optimized X-ray tube design allow for rapid, reliable results in both field and industrial environments.
What if I need better performance for gold, silver, or low-level elements?
If your application involves low concentration detection—such as gold (Au), silver (Ag), or other trace elements—you may benefit from a higher sensitivity instrument.
The SciAps X-550 Geo is specifically designed for these applications, offering enhanced sensitivity for low-level elemental detection in mining and exploration workflows.
Which XRF model is best for rare earth elements (REE) analysis?
For rare earth element (REE) analysis, the SciAps X-555 is the preferred model. It features a 55 kV X-ray tube, which provides superior excitation of higher atomic number elements and improves performance across REE applications.
This makes the X-555 a better choice for Rare Earth Element exploration.
How often should I replace the measurement window for the SciAps X-50?
Replace the measurement window when it becomes torn or dirty. This is critical for maintaining analyzer performance and preventing damage.
Who should choose the SciAps X-50 over other XRF models?
The X-50 is ideal for users who need a cost-effective handheld XRF analyzer focused on heavy metals and do not require light element detection.
- Scrap and recycling operations
- Manufacturing QA/QC teams
- Mining and exploration professionals
- Environmental consultants
For users needing expanded capabilities (light elements, trace detection, or REE analysis), upgrading to models like the X-200, X-505, X-550, or X-555 may be more appropriate.
Documents
Alloy Geek LLC supports customers in selecting, deploying, and maintaining handheld XRF analyzers for real-world applications. We provide application guidance, rentals, and sourcing support to help ensure the right fit for your work.
Alloy Geek LLC operates independently and is not an authorized distributor of SciAps products. New SciAps analyzers may be fulfilled through manufacturer or authorized distribution channels depending on configuration and availability. References to SciAps and related trademarks are used for identification purposes only and remain the property of their respective owners.