Description
360 Aluminum Certified Reference Material (CRM)
This 360 aluminum certified reference material is an aluminum alloy widely used as a standard for calibrating and verifying your spectrometer (XRF, ICP-OES, Spark-OES, etc.). This material is precisely manufactured and certified to have traceable measurements and specified impurity levels, ensuring reliable results for laboratories performing calibration, quality control, and materials testing.
This material is sometimes used as a complimentary CRM for AlSi10Mg.
Certified 360 Aluminum Chemical Composition:
| Element | Weight Percent (wt%) | Uncertainty (± wt%) |
|---|---|---|
| Si | 9.63 | 0.09 |
| Fe | 0.616 | 0.009 |
| Cu | 0.249 | 0.005 |
| Mn | 0.153 | 0.004 |
| Mg | 0.550 | 0.009 |
| Cr | 0.0006 | 0.0002 |
| Ni | 0.174 | 0.003 |
| Zn | 0.165 | 0.003 |
| Ti | 0.0638 | 0.0009 |
| Ag | 0.0001 | 0.0002 |
| B | 0.0001 | 0.00005 |
| Ca | 0.0014 | 0.0004 |
| Ga | 0.022 | 0.001 |
| Na | 0.00024 | 0.00005 |
| Pb | 0.061 | 0.003 |
| Sn | 0.070 | 0.003 |
| Sr | 0.0210 | 0.0008 |
| V | 0.0121 | 0.0005 |
| Zr | 0.0006 | 0.0002 |
Typical 360 Aluminum Chemical Composition:
| Element | % |
| Al | Balance |
| Si | 9-10% |
| Fe | 1.3% |
| Mg | 0.35% |
| Zn | 0.5% |
| Sn | 0.15% |
| Cu | 0.6% |
| Mn | 0.35% |
| Ni | 0.5% |
| Others | 0.25% |
Other Names:
Aluminum 360, AA360, A13600, 309, BS LM9, AFNOR A-S10G, 360.0, SG100A, SG100B
Available material forms:
- XRF: 64mm Diameter x 19mm Thick
- OES: 64mm Diameter x 25mm Thick
- Chips: not available
Certified Reference Material (CRM):
A certified reference material, or CRM, is a material that has been thoroughly analyzed and characterized using multiple validated methods to determine its chemical composition. The results of these analyses are then used to establish certified values, along with associated uncertainties. CRMs are produced and certified by accredited organizations or laboratories following internationally recognized standards, such as ISO Guide 34 (ISO 17034).
Click here to view Certificate
Please Contact Us if you would like to know the specific dimensions of a sample.